Filter
Top Products
23
TO MAINTAIN THE LIFE OF THE LAMP, ONCE
YOU TURN THE PROJECTOR ON, WAIT AT
LEAST FIVE MINUTES BEFORE TURNING IT
OFF.
“Power off?” disappears after 4 seconds.
Turning Off the Projector
Press the POWER ON/STAND-BY button on the top
control or on the remote control, and “Power off?”
appears on the screen.
Press the POWER ON/STAND-BY button again to turn
off the projector. The POWER indicator starts to blink
red, and the cooling fans keep running. (You can select
the level of fans’ quietness and speed. See “Fan” on
page 56.) At this time, you can unplug the AC power
cord even if the fans are still running.
1
2
3
When the projector has cooled down enough, the
POWER indicator stops blinking and you can turn on
the projector.
✔Notes:
• When the On start function is set to “On,” the projector
will be turned on automatically by connecting the AC
power cord to an AC outlet (p.53).
• The running speed of cooling fans is changed according
to the temperature inside the projector.
• Do not put the projector in a case before the projector is
cooled enough.
• If the WARNING indicator blinks or lights red, see
“Warning Indicators” on page 62.
• While the POWER indicator is blinking, the lamp is
being cooled down and the projector cannot be turned
on. Wait until the POWER indicator stops blinking to turn
on the projector again.
• The fan rotation will terminate directly if the AC power
cord is unplugged immediately after the projector is
turned off.
• The projector can be turned on after the POWER
indicator turns red. The waiting time to restart will be
shortened when the normal power-off processing for fan
cooling is completed, compared with the time the AC
power cord is immediately unplugged after the power-
off.
Basic Operation
DO NOT OPERATE THE PROJECTOR
CONTINUOUSLY WITHOUT REST.
CONTINUOUS USE MAY RESULT IN
SHORTENING THE LAMP LIFE. TURN OFF THE
PROJECTOR AND LET STAND FOR ABOUT AN
HOUR IN EVERY 24 HOURS.