Filter
Top Products
61
8. Use the Moderator Function
Registration of the Clients (Participants)
6. Select the projector (Selected projector will be blue.) in the group from the client screen.
(Moderator’s projector will be pink.) Click the Join the moderated session button.
7. Set session password screen will appear. Enter the password registered by a moderator
(Being registered at step 4)
8. Click “OK”. The client screen will disappear and the projector icon will be displayed in the
task tray of the computer. After the step, the client’s (participant’s) computer name will be
put under the moderator’s control. When joining the session, the client’s computer (or the
nickname) will be displayed in the moderator’s client list screen.
To quit the session, right-click the projector icon on the computer task bar and select “Exit
from the moderated session” from the menu. The client screen will appear and the client has
left the group.
✳ Set session password screen will be displayed by clicking the Set session password button.
Enter new password, then it will be a new password. If the password has changed while
the session is in progress, the clients who are participating the session will not be excluded
from the session.
✳ The projector displayed in red on the client’s screen means it is for moderator. Operation
cannot be done through the client screen.
All the preparation settings have been done for moderator function. Follow the instructions of
“How to Use Moderator Function” on the next page for the operation.
Join the moderator
session button