Filter
Top Products
66
9. How to Use Network Viewer
PJ Controller
button
Operation can be made with any of 1) PJ Controller, 2) Browser, or 3) Projector.
When operating with the projector, first, set the FTP server which provides images with 1) PJ
Controller or 2) Browser.
Operate as follows.
1) Operating with the PJ Controller
1. Select the projector input (Wired /Wireless).
Select “Wireless” for Wireless LAN and “Wired” for Wired LAN for the input source of the
projector. Activate “NetworkModule Client” or “NetworkModule Moderator”.
Detected projector names and IP addresses will be displayed.
Select the
projector.
2. Specify the projector to display the image.
Only one projector can be selected.
3. Click the PJ Controller button to display the PJ Controller screen. First, make “Initial Setting”
from the main menu. Refer to “10. How to Use PJ Control” ➔ “Initial Settings” (p.75).
4. Select Network Viewer from the Main Menu. Operation window (next page) will be displayed.
[Network Viewer]
Projecting the Image
Network Viewer