SATO 408E Label Maker User Manual


 
Section 3: Configuration and Operation
LM Basic 408e/412e Operator’s Manual Page 3-23
3.14 DOWNLOAD MODE
3.14.1 LCD Status
In the mode, the LCD shows whether the printer is ready to receive
the Flash Download. At the screen shown here, proceed to send
the program/font/command data from the host PC.
The following screen then appears.
The “>” sign is used to show the progress of the data transfer.
1. “>” means downloading has started.
2. “>>” means 1Mb of data has been received and processed.
3. “>>>” means 3Mb of data has been received and processed.
4. “>>>>” means the data transfer has completed.
5. “>>>>>” means that some data is being checked.
6. “>>>>>>” means the all data is being verified.
7. “>>>>>>>” means that the data has been verified and written to memory.
Do NOT turn the printer OFF when the printer is downloading data to Flash memory.
When the entire process is complete, the following screen appears:
Press the FEED button to return to the main Download Mode
screen.
FLASH DOWNLOAD
READY
XXXXXXX DOWNLOAD
START>>>>>>>END
DOWNLOADCOMPLETE
PRESS FEED KEY