Filter
Top Products
SECTION 5: INTERFACE SPECIFICATIONS
SATO D508/D512 Operator Manual Page 5-9
LED INDICATOR STATUS
INDICA-
TOR 1
INDICA-
TOR 2
INDICA-
TOR 3
DESCRIPTION
ON OFF OFF Weak Signal (1-50%)
ON ON OFF Moderate Signal (50-75%)
ON ON ON Strong Signal (75-100%)
OFF OFF ON 802.11 Ad hoc
OFF ON OFF Ad hoc
SOFTWARE SPECIFICATIONS
Corresponding Protocol TCP/IP
Network Layer ARP, RARP, IP, ICMP
Session Layer TCP, UDP
Application Layer LPD, FTP, TELNET, BOOTP, DHCP
NOTE: Print data can be sent by LPR and FTP of TCP/IP and dedicated socket protocol.
Printer status is obtainable by dedicated socket protocol.
NOTE: In the TCP/IP protocol enviroment, LPD and FTP are provided for printing; TELNET for
variable setup; ARP, RARP, and BOOTP/DHCP for address setup.
LPD protocol complies with RFC1179 and handles the list of logical printer name as queue
name such as lp, sjis, euc. In addition, a banner page can be printed by a proper setup. When
sending the job by LPR, the transmission order of data file/control file within the job will not
affect print operation. In addition, if the banner page is specified, it will be added to each data
file. Job deletion by LPR is not available.
FTP protocol complies with RFC959 and handles the list of logical printer name as a transfer
directory. File transfer to this directory executes print operation. It is possible to specify
ASCII(A), Binary(I) and TENEX(L8) as transfer mode - although the mode difference is depen-
dent on the client. A banner page may be printed with a proper setup.
TELNET Complies with RFC854. This operation consists of interactive menu form and enables
change and reference of internal setup, and to display status. To change the setup, enter “root”
user and password at the time of login. Default of root pasword is set as null (linefeed only).