Filter
Top Products
46 SATO RISC Printers
2. Command Codes Programming Manual
Input:
<ESC>A<ESC>PS
<ESC>H0001<ESC>V0100<ESC>L0202<ESC>XUM-8400RV
<ESC>H0001<ESC>V0175<ESC>L0202<ESC>XSM-8400RV
<ESC>H0001<ESC>V0250<ESC>L0202<ESC>XMM-8400RV
<ESC>H0001<ESC>V0325<ESC>L0101<ESC>OAM-8400RV
<ESC>H 0001<ESC>V0400<ESC>L0101<ESC>OBM-8400RV
<ESC>H0300<ESC>V0100<ESC>L0202<ESC>UM-8400RV
<ESC>H0300<ESC>V0175<ESC>L0202<ESC>SM-8400RV
<ESC>H0300<ESC>V0250<ESC>L02 02<ESC>MM-8400RV
<ESC>Q1<ESC>Z
Output:
Note:
1. Characters may be enlarged through the use of the Character
Expansion command.
2. Character spacing may be altered through the use of the Charac-
ter Pitch command. The default is 2 dots between characters. It
is recommended to use a spacing of 5 dots for OCR-A and 1 dot
for OCR-B.
3. You may also create custom characters or fonts. See the <ESC>T
Custom-Designed Characters command.
4. A font must be defined for each field to be printed. There is no
default font.
5. Fonts U, S, M, OA and OB are identical to fonts U, S, M, OA and
OB on the SATO M-8400 printer.
6. The proportionally spaced fonts XU, XS, XM, XL and XA can be
printed with fixed spacing using the <ESC>PS Proportional
Space command.
7. The matrices of the OA and OB fonts are scaled so that they will
remain a constant size according to the OCR-A and OCR-B spec-
ifications when printed on different resolution printers.
8 dot /mm 203 dpi 12 dot/mm 305 dpi
OA-Font 15 dots W x 22 dots H 22 dots W x 33 dots H
OB-Font 20 dots W x 24 dots H 30 dots W x 36 dots H