Filter
Top Products
50 SATO RISC Printers
2. Command Codes Programming Manual
Input:
<ESC>A<ESC>PS
<ESC>H0001<ESC>V0100<ESC>WB0M-8400RV
<ESC>H0001<ESC>V0185<ESC>WB1M-8400RV
<ESC>H0001<ESC >V0270<ESC>WL0M-8400RV
<ESC>H0001<ESC>V0355<ESC>WL1 M-8400RV
<ESC>H0300<ESC>V0100<ESC>XB0M-8400RV
<ESC>H0300<ESC>V0185<ESC>XB1M-8400RV
<ESC>H0300<ESC>V0270<ESC>XL0M-8400RV
<ESC>H0300<ESC>V0355<ESC>XL1M-8400RV
<ESC>Q1<ESC>Z
Output:
Note:
1. Auto-smoothing (when enabled) is only effective if the character
expansion rate is at least (3) times in each direction.
2. Characters may be enlarged through the use of the <ESC>L Char-
acter Expansion command.
3. Character spacing may be altered through the use of the <ESC>A
Character Pitch command.
4. A font must be defined for each field to be printed. There is no
default font.
5. The proportionally spaced fonts XU, XS, XM, XL and XB can be
printed with fixed spacing using the <ESC>PR Proportional
Space command.