Filter
Top Products
CX208 Software
Two basic software packages are supplied on the Ready-To-Go CD-ROM
included with each CX208 printer. Each package allows you to easily
change the configuration of the printer and print labels.
Label Wizard CX
Label Wizard CX is a full-featured label design and production software
package. It supports only the CX Series printers and cannot be used with
other SATO Singapore printers. Windows 3.1 or Windows 95/98/ME must be
installed and operating on your computer to use the software. You can up-
grade to the complete Label Wizard PRO package that supports all SATO
Singapore printers, including the CX208. Please contact your dealer for
upgrade information. The CD-ROM will Autorun under Windows
95/98/ME. To manually load the software, place the CD-ROM in your CD
drive and then select RUN from the Start Menu. Enter X:\CXWiz-
ard\Disk1\Install (where X is the drive letter associated with your CD
drive). Follow the instructions on the screen. After the software has been in-
stalled, you must must then install the SATO Generic printer (not the CX208
Windows Driver) using the Add New Printer selection in the Printer Folder.
When asked for the disk with the driver, enter C:\CXWizard\Driv-
ers\Win3X95 as the location of the driver.
Label Wizard CX stores the printer configuration with each label format.
When you enter the program for the first time, a Label Definition dialog
box is opened. You enter the basic information about your label (width,
length, etc.) in this box. Selecting the Printer button in the lower right cor-
ner will take you to the Advanced Printer Setup
CX208 UserGuide
dialog box.
Page 17
N
ote:
C
X208 printers require a "null modem" cable (pins 2-3 and 7-8 cross
c
onnected) when connected to another DTE device such as a personal
c
omputer. The SATO serial cables are wired in a null modem configuration
.
O
ther cables may require an external null modem adapter.