Filter
Top Products
Copying
50
2
Staple
The optional finisher and the bridge unit are required to use this function.
Each copy set can be stapled together.
Limitation
❒ You cannot use the following paper in this function:
• Postcards
• Translucent paper
• OHP transparencies
• Adhesive labels
• Curled paper
• Low stiffness paper
• Paper of different vertical sizes
Note
❒ For this mode, the following limitation applies. When the number of copies
exceeds the tray capacity, copying stops. In this case, remove the copies from
the shift tray and then resume copying.
❖
❖❖
❖ Metric version
*1
Depending on the number of sheets to be stapled and whether sheets have
punched holes or not, the maximum tray capacity might be reduced.
With 1000-Sheet Finisher With 2 Tray Finisher
Paper size A3
L
, B4
L
, A4
KL
, B5
K
A3
L
, B4
L
, A4
KL
, B5
KL
Stapler
capacity
• A4 or smaller: 30 sheets (80g/m
2
)
• B4 or larger: 20 sheets (80g/m
2
)
• A4 or smaller: 50 sheets (80g/m
2
)
• B4 or larger: 30 sheets (80g/m
2
)
• Mixed Size: 30 sheets (80g/m
2
)
Shift tray
capacity
(A4
K
)
*1
1,000 sheets (80g/m
2
) • Finisher shift tray 1: 500 sheets
(80g/m
2
)
• Finisher shift tray 2: 1,500 sheets
(80g/m
2
)
AdonisC2_ENcopy122F_FM.book Page 50 Thursday, February 15, 2001 3:23 PM