Filter
Top Products
Copying
14
2
The copy is delivered from the slot on top of the copier (B).
If you make several copies of the same original, when the copy comes out, re-
move it and repeat from step C
Note
❒ If you want to catch copies at the back of the machine, change the copy de-
livery direction as shown in the figure.
Note
I
Do not hold down or pull out the original during copying. Do not put
heavy object on the original table.
❒ If you do not insert the original in a certain interval after inserting the pa-
per, the paper will be ejected automatically.
❒ If the copier is idle at a certain time after you have used it, the machine re-
sets itself to the initial settings (Auto Reset). If the copier is not used for a
long time, it will turn itself off (Auto Off ).
❒ You can preset the initial settings of the copier ⇒ P.36 “B) Changing the De-
fault Setting”