Filter
Top Products
4
Guide to Components
1.
Platen cover (option)
Lower this cover over originals placed on
the exposure glass for copying.
2.
Flip cover
Flip this up when to access the keys un-
derneath.
3.
Main power switch
To start the machine, turn on this switch.
Note
❒ If the machine does not operate after
turning on the operation switch, check
if the main power switch is turned on.
If it is off, turn it on.
4.
Copy tray
Copied paper is delivered here.
5.
Stopper
When you copy onto thin paper, raise
this to prevent curling.
6.
Paper tray
Set paper here.
7.
Front cover
Open to access the inside of the machine.
8.
Operation panel
⇒ P.7 “Operation Panel”.
9.
Operation switch
Press this switch to turn the power on
(the On indicator goes on). To turn the
power off, press this switch again (the On
indicator goes off).
10.
Exposure glass
Position originals here face down for
copying.
Trsh011e.eps