Filter
Top Products
Setting one Original at a Time in the Document Feeder
21
1
Setting one Original at a Time in the
Document Feeder
If you set one original at a time in the document feeder, the second and subse-
quent originals can be fed and copied automatically without pressing the {Start}
key.
Note
❒ Do not press down or hold originals after inserting them.
❒ While originals are fed from the original table to the exposure glass, do not
pull them out.
❒ Do not lift the document feeder until the original has been completely fed out.
A
Correct any curl, fold, or crease in the originals before setting them.
B
Make sure the Insert Original indicator is lit and the exposure glass is clear
of originals.
C
Adjust the guide to the original size.
D
Set the original face up into the document feeder until the Insert Original
indicator goes off.
Note
❒ If you are copying a stack of originals one sheet at a time and you want to
keep them in order, start with the last page of the originals.
❒ The original guide must touch the front side of the original.
E
Press the {
{{
{Start}
}}
} key.
Trsr050e.eps