Communication Information
62
4
B Enter the transmission time (4
digits) with the number keys.
Use 24-hour or 12-hour format
depending on your area. For 12-
hour format, press [AM ↔
↔↔
↔ PM] to
switch between AM and PM
(North America only).
Note
❒ You can not specify a start
time more than 24 hours.
❒ When changing the time, se-
lect AM or PM before enter-
ing the time.
❒ To start transmission imme-
diately, press [Immediate]. If
memory contains other files
queued for transmission,
those files are sent first.
Re-sending a File
This function is valid when the ma-
chine is set up with the User Pa-
rameters to save messages that
could not be sent in memory.
If you select the failed transmis-
sion file, you can resend it. This
feature allows you to transmit a fax
message again. These files will be
kept for either up to 24 or 72 hours
depending on how you program
this feature. ⇒ P.130 “Changing the
User Parameters”(Switch24, Bit1,0)
A Enter the “Retransmit ” number
with the number keys.
B Press [Yes].
Note
❒ If you do not want to send
the file, press [
No
].
C Enter the “Change Start Time”
number with the number keys.
D Enter the start time with the
number keys and press [Exit].
Note
❒ You can not specify a start
time more than 24 hours.
❒ To start transmission imme-
diately, press [Immediate]. If
memory contains other files
queued for transmission,
those files are sent first.
Gbfax-007.tif Us114-1.tif
Us114-2.tif
Gbfax-006.tif
Gbfax-007.tif
