Network
Management Card
User Manual
Network Management Card
– User Manual 34003676EN/HA
Page
14/81
•
• Battery operation
•
• Load powered by main AC
•
• Loss of communication with the UPS
•
• Battery fault
“Communication”: indicates the status of the communication between the card and the UPS
“Power source”: indicates whether the power comes from the utility or from the UPS battery
“Batteries”: indicates whether the battery is being charged or discharged
“Output load level”: indicates the power percentage used at UPS output
“Output”: indicates if the UPS output is protected, Powered or not Powered
3.2.1.3 “Battery status” zone:
◗ “Bargraph”: Graph showing the remaining battery charge (in percent).
◗ “Battery charge level”: Remaining battery charge (in percent).
◗ “Remaining backup time”: Estimation of the maximum backup time remaining before UPS shutdown.
This time can be modified by the adjustments on the “Shutdown parameters” page
◗ “Last periodical test”: Result of the last automatic battery test carried out by the UPS
Possible values are:
- OK: the test was completed correctly
– NOK: the battery needs to be checked
– Deactivated: the automatic battery test is not validated on the UPS