Filter
Top Products
PowerLogic
TM
E4800 Series 930-112-01
PowerLogic E4800 configuration tool guide 02/2009
© 2009 Schneider Electric All Rights Reserved12
Report Parameters
The Report section in the main configuration window has three tabs:
• the Period tab allows the user to configure when the reports are
generated and the interval at which data is collected. Figure 6 shows
the Period tab, and Table 3 lists configuration parameters within the
tab.
• the Types tab allows the user to configure the types of reports that are
generated, and to define the metering parameters that are to be logged
on an interval basis. Figure 7 shows the Types tab, and Table 4 lists the
configuration parameters within the tab.
• the Real Time Interval tab allows the user to configure real time
reporting daily, or at a specified regular interval in minutes. It allows the
user to define how often the meter is to send interval data to a server.
This setting works independenly from the Period tab setting. Figure 8
shows the Real Time Interval tab, and Table 5 lists the configuration
parameters within the tab.