Scientific Atlanta DPR2320 Network Router User Manual


 
How Do I Configure the Gateway Cable Modems?
59
Configuring Firewall Time of Day Access Filters
Use the Setup Firewall – Time of Day Access Filter page to block all traffic to and
from specific computers based on the day of week and the time of day.
If you are not familiar with the advanced settings detailed in this section,
contact your cable service provider before you attempt to change any of the
gateway cable modem default firewall event logging settings.
Click Time of Day Filters in the Firewall section of the Setup page to access the
Setup Firewall – Time of Day Access Filter page.
Setup Firewall – Time of Day Access Filter Page Example
The following illustration is an example of the Setup Firewall – Time of Day
Access Filter page.
The gateway uses the network time of day clock that is managed by your
data service provider. The time of day clock must be accurate and represent the
time of day in your time zone for this feature to operate properly. Verify that the
Status page reflects the correct time of day. If it does not reflect the correct time
of day, contact your data service provider. You can also adjust you settings to
account for the difference.