Scientific Atlanta DPR2320 Network Router User Manual


 
WebSTAR DPR2320 and EPR2320 Gateway Cable Modems User’s Guide
62
Configuring Your Wireless Access Point Parameters
Use the Setup Wireless – Basic page to configure your wireless access point
(WAP) parameters, included SSID and channel number.
If you are not familiar with the advanced settings detailed in this section,
contact your cable service provider before you attempt to change any of the
gateway cable modem default wireless basic settings.
Click Basic in the Wireless section of the Setup page to access the Setup
Wireless – Basic page.
Setup Wireless – Basic Page Example
The following illustration is an example of the Setup Wireless – Basic page
showing the factory default settings.
Setup
New Channel:
Current Channel:
Encryption Mode:
Access Point:
Service Set Identifier (SSID)
1
1
No Encryption
WebSTAR
This page allows you to configure your wireless access point parameters, including SSID and channel
number.
Wireless - Basic
Apply
TM
System
Signal
Status
Log
Setup
Basic Service Set Identifier (BSSID)
Country:
00:0a:73:9e:be:77
USA
On Off