Filter
Top Products
Medalist Pro 2160N, Rev. B 15
Additional drive options
Figure 7. Options jumper settings
The options jumper block allows you to configure your drive for
several additional configuration options. The drawing in Figure 7
shows how to place jumpers to enable each optional feature. A
brief description of each option is included.
Parity Enable. Parity is enabled when a jumper is installed on
pins 7 and 8 (default). To disable parity, remove this jumper.
Motor Start Enable. The Motor Start option causes the drive to
wait for a Start/Stop Unit command from the host before starting
or stopping the spindle motor. Motor start is enabled when a
jumper is installed on pins 11 and 12.
11 9 7 5 3 1
1210 8 6 4 2
13
14
Parity Disabled
Parity Enabled
Motor Start Disabled
Motor Start Enabled
Remote LED
connection