Seagate ST1000NM0033 Computer Drive User Manual


 
6 CONSTELLATION ES.3 SERIAL ATA PRODUCT MANUAL, REV. A
*One GB equals one billion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operating environment and formatting.
**During periods of drive idle, some offline activity may occur according to the S.M.A.R.T. specification, which may increase acoustic and power to operational levels.
Relative humidity 5% to 90% (operating)
5% to 95% (nonoperating)
Relative humidity gradient 30% per hour max
Altitude, operating –304.8 m to 3,048 m
(–1000 ft to 10,000+ ft)
Altitude, nonoperating
(below mean sea level, max)
–304.8 m to 12,192 m
(–1000 ft to 40,000+ ft)
Operational Shock (max at 2 ms) Read 70 Gs / Write 40 Gs
Non-Operational Shock (max at 2 ms) 300 Gs
Vibration, operating 5–22 Hz: 0.25 Gs, Limited displacement
22–350 Hz: 0.50 Gs
350–500 Hz: 0.25 Gs
Operation Rotational vibration 20–1500Hz: 12.5 rads/s²
Vibration, nonoperating 10–500 Hz: 4.9 Grms ref
Drive acoustics, sound power (bels)
Idle** 2.8 (typical)
3.0 (max)
Performance seek 3.0 (typical)
3.4 (max)
Nonrecoverable read errors 1 sector per 10
15
bits read
Annualized Failure Rate (AFR) 0.63% based on 8760 POH
Warranty To determine the warranty for a specific drive, use a web browser to access the following web page: sup-
port.seagate.com/customer/warranty_validation.jsp
You will be asked to provide the drive serial number, model number (or part number) and country of purchase.
After submitting this information, the system will display the warranty information for your drive.
Load-unload cycles 600,000
Supports Hotplug operation per
Serial ATA Revision 2.6 specification
Yes
Drive specification
ST4000NM0033
ST4000NM0053
ST4000NM0103
ST3000NM0033
ST3000NM0053
ST3000NM0103
ST2000NM0033
ST2000NM0053
ST2000NM0103
ST1000NM0033
ST1000NM0053
ST1000NM0103