Filter
Top Products
Barracuda 180 Product Manual, Rev. A 47
The following tables list the values of the data bytes returned by the drive in response to the Mode Sense com-
mand pages for SCSI Ultra160 implementation (see the SCSI Interface Product Manual).
Definitions: DEF = Default value. Standard drives are shipped configured this way.
CHG = Changeable bits; indicates if current and saved values are changeable.
Note.
Saved values for OEM drives are normally the same as the default values.
Table 7: Mode sense data, ST1181677 values
[1] Although byte 12, bit 7 (a0) is shown as changeable, the FSW function governed by that bit is not imple-
mented by this drive.
Bytes 00010203040506070809101112 1314151617181920212223
Mode
Sense
Data
00 A6 00 10 00 00 00 08 15 22 C4 41 00 00 02 00
Mode
Page
<------------------------------Mode Page Headers and Parameter Data Bytes---------------------------->
01 DEF
81 0A C0 0B F0 00 00 00 05 00 FF FF
01 CHG 81 0A FF FF 00 00 00 00 FF 00 FF FF
02 DEF 82 0E 80 80 00 0A 00 00 00 00 00 00 00 00 00 00
02 CHG 82 0E FF FF 00 00 00 00 00 00 00 00 87 00 00 00
03 DEF 83 16 11 06 00 00 00 10 00 00 02 63 02 00 00 01 00 5A 00 54 40 00 00 00
03 CHG
83 16 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
04 DEF 84 16 00 5E B7 18 00 00 00 00 00 00 00 00 00 00 00 00 00 00 1C 09 00 00
04 CHG
84 16 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
07 DEF 87 0A 00 0B F0 00 00 00 00 00 FF FF
07 CHG 87 0A 0F FF 00 00 00 00 00 00 FF FF
08 DEF 88 12 14 00 FF FF 00 00 FF FF FF FF 80 03 00 00 00 00 00 00
08 CHG 88 12 B5 00 00 00 FF FF FF FF 00 00 A0[
1
]FF 00 00 00 00 00 00
0A DEF 8A 0A 02 00 00 00 00 00 00 00 15 DA
0A CHG 8A 0A 03 F1 00 00 00 00 00 00 00 00
1A DEF 9A 0A 00 03 00 00 00 01 00 00 00 04
1A CHG 9A 0A 00 03 00 00 00 00 00 00 00 00
1C DEF 9C 0A 10 00 00 00 00 00 00 00 00 01
1C CHG 9C 0A 9D 0F FF FF FF FF FF FF FF FF
00 DEF 80 06 00 00 07 00 00 00
00 CHG 80 06 FF 40 07 00 00 00
Read capacity data
15 22 C4 40 00 00 02 00