Filter
Top Products
Mounting the drive
Required materials:
• Four 6-32 UNC-2A screws (not included)
The drive fits in the standard 3.5-inch bay and can be mounted
in any orientation. Secure the drive with four mounting screws not
more than 6 full turns (0.20 inches) into the drive frame (see
Figure 3). Position the drive so that the cables are not strained or
crimped.
Caution. To prevent drive mounting-hole damage, use only the
type of screws specified.
This completes the hardware installation.
Figure 3. Mounting holes
10 Medalist 1270 Installation Guide, July 1995