Filter
Top Products
Disabling Maximum Overdrive
Maximum Overdrive enables the drive’s read/write multiple fea-
ture. You can disable Maximum Overdrive during the installation
process or anytime afterward.
To disable it during the installation, select the Change Install
Features option in the Options dialog box that appears when the
format completes. This feature allows you to enable or disable
Maximum Overdrive.
To disable it after the drive has been installed:
1. Insert the Seagate software diskette with EZ-Drive into the
diskette drive.
2. Type ez at the command line.
3. Go to the Main menu and select Installation Options. Press
ENTER.
4. Select Change Install Features and press ENTER.
5. Select Disable Maximum Overdrive.
6. Press the
ENTER
key to change the status.
7. Use the down-arrow key to select Save Changes. Press
ENTER
to save.
Additional EZ-Drive troubleshooting and help information is avail-
able when you select Information Help in the main menu. An-
swers to frequently asked troubleshooting questions are
available in the EZ-HELP.EXE file on the diskette.
Medalist 1270 Installation Guide, July 1995 29