Filter
Top Products
22 ST43401N/ND, ST43402ND User’s Manual, Rev. B
Unpacking, inspection, and repacking
After removing the packing material, inspect the drive for shipping damage.
Save all packing materials for future use.
The drive is shipped separately from any other items ordered for the
installation.
Unpacking
1. Allow the drive temperature to approach the ambient temperature of the
unpacking area. Ensure that the temperature stabilization period meets
the requirements printed on the drive container.
2. Open the package and remove the drive from its conductive static
shielding bag, using precautions described in “Electrostatic discharge
protection” in the preface.
3. Check all items against the shipping bill for the required equipment and
hardware to complete installation. Discrepancies, missing items, dam-
aged equipment, etc. should be reported to the sales representative from
whom the drive was purchased.
Inspection
Inspect the drive for possible shipping damage. All claims for shipping
damage should be filed with the carrier involved.
Repacking
If it is necessary to ship the drive, repack the drive with the original packing
materials (saved during unpacking). Refer to Section 5 for instructions.