Filter
Top Products
50 ST43401N/ND, ST43402ND User’s Manual, Rev. B
Table 8. Options and accessories
Part
number Description
12263496 Static ground wrist strap, 6 1/2 to 8-inch wrist
** I/O cables (unshielded)
** External terminators
96752447 Terminator resistor-pak, single-ended
70906701 Terminator resistor-pak, differential
70935801 Terminator adapter cable assembly, differential
75168323 AC power cord set, 100–120V, 60 Hz, 5-15P
75168334 AC power cord set, 208–240V, 60 Hz, 6-15P
75168324 AC power cord set, 208–240V, 50 Hz
89500420 DC power cable, 24 inches (609.6 mm) long
(power supply to drive)
89500422 DC power cable, 6 inches (15.2 cm) long (power supply to drive)
70553701 Bezel, black (with red LED, cable, and double-sticky tape)
70553702 Bezel, black (with green LED, cable, and double-sticky tape)
70703929 Spindle sync cable*, 1.5 feet (0.46 meter) long
70703921 Spindle sync cable*, 3 feet (0.92 meter) long
70703922 Spindle sync cable*, 5 feet (1.52 meter) long
70703923 Spindle sync cable*, 7 feet (2.12 meter) long
70703924 Spindle sync cable*, 10 feet (3.05 meter) long
70703925 Spindle sync cable*, 20 feet (6.10 meter) long
70703926 Spindle sync cable*, 30 feet (9.14 meter) long
70703927 Spindle sync cable*, 40 feet (12.20 meter) long
70703928 Spindle sync cable*, 50 feet (15.24 meter) long
70574221 Spindle sync terminator
97630051 Shunt, two-pin (2 mm)
(used to select options on circuit board jumpers)
70935801 Adapter cable assembly
* A custom cable may be needed for spindle sync connection between a drive
and an external source.
**See the reference manual (publication 83327730) for part numbers of
terminators, complete I/O cables, and connectors and cabling needed to
create custom I/O cables.