SEAL SM110EN Laminator User Manual


 
Disassembly / Reassembly Procedures
24
4. Remove the two M4 bolts (see the white arrows in
figure 20, the left hand Photoelectric Cell is shown
here).
5. The Photoelectric Cell can now be removed.
Reassembly
6. When reassembling the Photoelectric Cell, make
sure that the bracket is positioned in such a way,
that the M4 bolt is in the middle of the vertical slot as
in figure 20 (three white lines). The same procedure
counts for the other Photoelectric Cell.
7. Insert the connector and secure it with the metal spring clip.
8. Assemble the new tie-wraps as shown in figure 20.
fig. 20