Filter
Top Products
29
Engli
s
h
6. When not using the extension cable for power supply packed with
the DM-D stand, go to step 7.
When using the extension cable, connect it (with the arrow mark
up) to the extension cable connector indicated with “POWER OUT”
on the DM-D stand; then connect the other end to the power
connector on the printer.
7. Connect the DC cable of the power supply unit (with the arrow
mark up) to the power supply unit connector indicated with
“POWER IN” on the DM-D stand.
8. When using as a stand alone product, set the jumpers. (See “Jumper
setting” on page 26.)
extension cabl
e
connector
extension cable for
power supply
DC cable of power
supply unit
power supply unit
connector