![](http://pdfasset.owneriq.net/2/d5/2d565635-3544-4e3c-840f-48d1f191eb90/2d565635-3544-4e3c-840f-48d1f191eb90-bg20.png)
30
9. Arrange the cables as shown below. Put the cables for the DM-D500
inside the DM-D stand.
10. Attach the base plate to the DM-D stand following the number of
the arrow shown below. At this time, push the base plate until it is
locked by the hook on the DM-D stand.
11. When the extension support (DP-105) is used, attach Velcro tapes to
the four corners of the plate to avoid falling down.
12. Connect the cord of the power unit to the socket.