Filter
Top Products
48
15 Selecting a frequency memory
– selecting a frequency and channel number
̈ With the ̆/̄ buttons you can directly switch between the
factory-preset fixed frequency memories (presets). The display
starts flashing. Your selection becomes effective immediately.
̈ Press the SET button to acknowledge your selection. The display
stops flashing. (If the SET button is not pressed, the transmitter
will store the new frequency automatically on switch-off).
Note:
You can choose the content of the standard display i.e.
whether the frequency or the channel number is displayed
(u “19 Selecting the content of the standard display (DiSPL)”,
page 52). The transmitter is factory-preset to show the frequency
setting as standard.