Filter
Top Products
51
18 Switching the phantom powering on/off (PHAnto)
The SKP 30 transmitter can supply condenser microphones with
48 V phantom powering (P48). Please note: Dynamic microphones
can be operated in phantom powering mode without harm.
However, if no condenser microphone is being used, you should
switch off the phantom powering. With the phantom powering
switched on, the operating time of the battery will be reduced to
approx. 5 hours.
The phantom powering can be switched on or off via the operating
menu:
̈ Select the “PHAnto” menu by pressing the SET button until
“PHAnto” appears on the display; after a short pause the current
setting is displayed.
̈ Press the ̆ button to switch the phantom powering on – if you
press the
̄ button, the phantom powering is switched off. The
new setting – i.e. “On” or “OFF” – starts flashing on the display.
̈ Press the SET button to return to the top menu level. The display
then switches back to the standard display.
̆
̄