Filter
Top Products
55
Assigning a channel number (Ch no)
You can now assign each frequency memory a channel number
(from 0 to 255). With larger systems, we recommend using the same
channel numbers for both transmitters and receivers in order to
provide for simpler monitoring of the system.
̈ Select the frequency memory for which you wish to assign a
channel number (u “15 Selecting a frequency memory – selec-
ting a frequency and channel number”, page 48).
̈ Select the “Ch no” menu by pressing the SET button until “Ch no”
appears on the display; after a short pause the currently assigned
channel number is displayed.
̈ With the ̆/̄ buttons you can now select a different channel
number. The new channel number starts flashing on the display
and becomes effective immediately.
Note:
Channel numbers which have already been assigned to a fixed
frequency memory are skipped!
̈ Press the SET button to return to the top menu level. The display
then switches back to the standard display.