Filter
Top Products
Configuring the Country Code
The Sentry integrated Modem is compliant for use per Telecom Certification for the countries listed in
the following table. The AT%T19,0, command is used to set the country code. The default value is 34.
NOTE: For countries not listed, please contact Server Technology Technical Support.
Country Codes (Approved as of February 2003)
Country Code Result Code Country Code Result Code
Argentina 34 52
Australia 1 1
Austria 34 52
Belgium 34 52
Brazil 34 52
Canada 34 52
Chile 34 52
China 34 52
Cyprus 34 52
Czech Republic 25 37
Denmark 34 52
Estonia 34 52
Finland 34 52
France 34 52
Germany 34 52
Greece 34 52
Hong Kong 30 48
Hungary 30 48
Iceland 34 52
India 30 48
Indonesia 30 48
Ireland 34 52
Israel 30 48
Italy 34 52
Japan 10 16
Liechtenstein 34 52
Luxembourg 34 52
Malaysia 30 48
Mexico 34 52
Netherlands 34 52
New Zealand 9 9
Norway 34 52
Philippines 30 48
Poland 30 48
Portugal 34 52
Russia 34 52
Singapore 30 48
Slovak Republic 30 48
South Africa* 35 53
South Korea 34 52
Spain 34 52
Sweden 34 52
Switzerland 34 52
Taiwan 34 52
Thailand 34 52
Turkey 34 52
United Kingdom 34 52
United States 34 52
*Compliance requires use of an approved surge protection device in conjunction with modem.
To configure the country code:
After successfully logging into the modem, type at%t19,0, followed by the country code and press Enter.
Type atz and press Enter to reset the modem with the new settings.
Example
The following command sets the modem for compliance in Singapore:
at%t19,0,30<Enter>
OK
atz<Enter>
OK
To verify the configured country code:
Type ati9 and press Enter. The displayed Result Code should match the code listed in the previous table.
.
6 • Operations Sentry Global Security Modem
Installation and Operations Manual