Sharp AL-2060 Scanner User Manual


 
24
INITIAL SETTINGS
To change the order of display of the date, follow the steps below:
1
Press the [MENU] key.
2
Press the [ ] key ( ) or [ ] key ( )
until "4:USER PROGRAM" appears,
and then press the [OK] key.
3
Press the [ ] key ( ) or [ ] key ( )
until "21:DATE&TIME FORMAT"
appears, and then press the [OK] key.
4
Press the [ ] key ( ) or [ ] key ( )
until "2:DATE FORMAT" appears, and
then press the [OK] key.
5
Press the [ ] key ( ) or [ ] key ( )
to select the display order.
The selections are as
follows:
1:MMDDYYYY
2:DDMMYYYY
3:YYYYMMDD
6
Press the [OK] key.
7
Press the [MENU] key.
Press the [MENU] key to
exit.
This selection does not affect the order of
the date that appears in "2:DATE & TIME
SET" in step 4 on page 22.
The date in this step always appears in the
format "YYYYMMDD".
1,2,3,
1,2,3,
SP. FUNC
"4:USER PROGRAM"
Selection
"21:DATE&TIME FORMAT"
Selection
"2:DATE FORMAT"
Selection
1,2,3,
1,2,3,
SP. FUNC
Note
1,2,3,
1,2,3,
SP. FUNC
1,2,3,
1,2,3,
SP. FUNC