Sharp AL-2060 Scanner User Manual


 
28
INITIAL SETTINGS
SETTING THE NUMBER OF RINGS FOR AUTO RECEPTION
You can set the number of rings before the machine answers in AUTO mode using the procedure below.
1
Press the [MENU] key.
2
Press the [ ] key ( ) or [ ] key ( )
until "4:USER PROGRAM" appears,
and then press the [OK] key.
3
Press the [ ] key ( ) or [ ] key ( )
until "4:# OF RINGS (AUTO)" appears,
and then press the [OK] key.
4
Press a numeric key to select the
number of rings.
Select the number of
rings you would like to
use (0 to 9).
5
Press the [OK] key.
6
Press the [MENU] key.
Press the [MENU] key to
exit.
1,2,3,
1,2,3,
SP. FUNC
"4:USER PROGRAM"
Selection
"5:# OF RINGS (AUTO)"
Selection
1,2,3,
1,2,3,
SP. FUNC
If an external telephone is connected, the
external telephone will ring one time when
auto reception is set to 0 rings.
1,2,3,
1,2,3,
SP. FUNC
Note