Sharp AL-2060 Scanner User Manual


 
49
CHOOSING SUITABLE MEDIA
3
UNSUITABLE ORIGINALS
General guidelines:
All clips, staples, and pins should be removed from originals before they are used. If these are not removed, they
may damage the machine.
Ink, glue, and correction fluid on originals must be completely dry before using the originals with the machine.
Originals that are in some way dangerous to the internal mechanisms of the machine should not be used.
When faxing, any writing on the originals that is yellow, yellowish-green, or light blue cannot be transmitted.
The following kinds of originals should not be used:
Originals with a glossy coating
Originals with static electricity
Originals with tears, folds, or curls
Originals that have become stuck together and cannot be easily separated
Originals with holes, windows, or perforations
Transparency films, tracing paper, or other transparencies
Originals with plastic or metallic coatings
SHARP does not accept any responsibility for the loss or damage of originals.
It is a good idea to copy valuable originals on a flat-bed copier before using them with the machine.
Scanning an original that is longer than 500 mm will result in a misfeed.
Note