Filter
Top Products
GETTING STARTEDGETTING STARTED
11
GETTING STARTED
Changing the copy paper size in the tray
1
Gently lift and pull out the paper tray until it stops.
2
Push the pressure plate down until it locks in place.
3
Squeeze the lock lever of the front guide and slide the
front guide to match the width of the paper.
4
Move the left guide to the appropriate slot as marked
on the tray.
●
When using 5-1/2" x 8-1/2" copy paper, load it into the uppermost
paper tray. If other trays (in optional paper feed units) are used, paper
misfeeds may occur.
●
When using 11" x 17" copy paper, store the left guide in the slot at
the left front of the paper tray.
5
Load copy paper into the tray.
6
Place the appropriate label to indicate the selected
paper size into the recess on the right front side of the
paper tray.
7
Push the paper tray firmly back into the copier.
Loading copy paper
LOADING COPY PAPER
Front guide
Left guide