Sharp DT-300 Projector User Manual


 
-32-32
Turning the Power off
1 Press on the remote con-
trol or
on the projector,
then press
or again
while the confirmation message
is displayed, to put the projec-
tor into the standby mode.
A dimly-lit screen is displayed for a
short time to reduce lamp damage.
Note
If you accidentally pressed
and do not want to put the projector
into the standby mode, wait until the
confirmation message disappears.
2
Unplug the power cord from the
AC outlet after the cooling fan
stops.
Info
Do not unplug the power cord dur-
ing projection or cooling fan opera-
tion. This can cause damage due
to the rise in internal temperature,
as the cooling fan also stops.
When connected to equipment such
as an amplifier, be sure to turn off
the power to the equipment con-
nected first and then to the projec-
tor.
Image Projection
STANDBY button
STANDBY button
03.10.29, 2:42 PMPage 32