Sharp DT-300 Projector Accessories User Manual


 
Setup
Removing the Swivel
Stand
1 Lift the projector (2) with press-
ing the removing-stand button
on the back of the projector (1).
1
2
Removing-
stand button
-24
Attaching the Swivel
Stand
1 Align the tabs on the front bot-
tom of the projector (1).
2 While holding down the button
(2), place the projector onto the
Swivel Stand (3) to attach.
3 Press the projector down
firmly to attach it to the Swivel
Stand to make sure it is se-
curely attached to the Swivel
Stand.
1
3
2
03.10.29, 2:40 PMPage 24