Filter
Top Products
-48
Adjusting the Computer and DVD/DTV Images
Use the Fine Sync function in case of irregularities such as vertical stripes or flickering in
portions of the screen.
When Auto Sync is OFF
When “Auto Sync” is “OFF”, interference
such as flickering or vertical stripes may oc-
cur if displaying tilings or vertical stripes.
Should this occur, adjust “Clock”, “Phase”,
“H-Pos” and “V-Pos” for obtaining an opti-
mum image.
Select “Clock”, “Phase”, “H-Pos” or “V-
Pos” in the “Fine Sync” menu on the
menu screen.
➝For operating the menu screen, see
pages 38 to 41.
On-screen Display
-48
Selected Item Description
Clock
Phase
H-Pos
V-Pos
Adjusts vertical noise.
Adjusts horizontal noise (similar to tracking on your VCR).
Centers the on-screen image by moving it to the left or right.
Centers the on-screen image by moving it up or down.
Note
•“Clock”, “Phase”, “H-Pos” and “V-Pos” can-
not be used in the DIGITAL INPUT mode.
•“Clock” and “Phase” cannot be used in the
Component mode.
•Computer image adjustments can be
made easily by pressing
AUTO SYNC
on the re-
mote control. See page 50 for details.
•To reset all adjustment items, select “Re-
set” on the “Fine Sync” menu screen and
press
.
•The adjustable area of each item may be
changed according to the input signal.
03.10.29, 2:44 PMPage 48