Sharp DT-300 Projector Accessories User Manual


 
-52
Using the Options Menu
-52
Selecting the Signal
Type
This function allows you to select the input
signal type Component or RGB for INPUT 2.
Select Signal Type in the Options
menu on the menu screen.
For operating the menu screen, see
pages 38 to 41.
Note
RGB or Component can be selected
with
on the remote control only in
INPUT 2.
On-screen Display
Setting the Video Signal
(VIDEO menu only)
The video input system mode is preset to
Auto; however, it can be changed to a spe-
cific system mode if the selected system mode
is not compatible with the connected audiovi-
sual equipment.
Select Video System in the Options
menu on the menu screen.
For operating the menu screen, see
pages 38 to 41.
Note
When the system mode is set to Auto,
you may not receive a clear picture due
to signal differences. Should this occur,
switch to the video system of the source
signal.
•“Auto cannot be set for PAL-M and PAL-
N input signals. Select PAL-M or PAL-
N in Video System menu for PAL-M and
PAL-N input signals.
On-screen Display
Set when RGB signals are
received.
Set when Component signals
are received.
RGB
Component
Selected Item
Description
RGB/COMP. button
03.10.29, 2:46 PMPage 52