Sharp DT-300 Projector Accessories User Manual


 
-28
Rear Projection
Place a translucent screen between the projector and the au-
dience.
Use the projectors menu screen to reverse the projected im-
age. (See page 56
for use of this func-
tion.)
Note
Optimal image quality can be achieved when the projector is
positioned perpendicular to the screen with all feet flat and lev-
eled.
Projection using a mirror
Place a mirror (normal flat type) in front of the lens.
Info
When using a mirror, be sure to carefully position both the
projector and the mirror so the light does not shine into the
eyes of the audience.
Ceiling-mount setup
It is recommended that you use the optional Sharp ceiling-mount
bracket for this installation.
Before mounting the
projector, remove the
Swivel Stand. (See pages
24 and 25 for removing and
attaching the Swivel Stand.)
Before mounting the
projector, contact your
nearest Sharp Authorized
Service Center or Dealer to
obtain the recommended ceiling-mount bracket (sold
separately). (AN-CM260 ceiling-mount bracket, AN-EP101B
extension tube for AN-CM260.)
When the projector is in the inverted position, use the upper
edge of the screen as the base line.
Use the projectors menu screen to select the appropriate pro-
jection mode. (See page 56 for use of this function.)
When using the default setting.
On-screen Display
Image Projection
The image is reversed.
When using the default setting.
On-screen Display
The image is inverted.
Setup
03.10.29, 2:41 PMPage 28