Filter
Top Products
121
1.
Remove the printer cover.
2.
Rotate the knob on the ink ribbon cassette in the direction of
the arrow to stretch the ribbon tight.
3.
Put the ink ribbon cassette in the location indicated in the
figure at left and fix it by using the right and left guides.
4.
Rotate the knob two or three turns in the direction of the arrow
to make sure it rotates smoothly. Also, make sure the ribbon is
not folded.
5.
To remove the cassette, lift it up.
Precautions:
• Be sure to use an ink ribbon cassette specified by SHARP. The use of any ink ribbon cassettes other
than specified could cause troubles in the printer.
• After opening the parcel, be careful not to make the surface of the ink ribbon dirty, and install it soon.
• If you preserve the ink ribbon cassette for a long time, the ink will be dry and the ink ribbon cassette's
life will be shortened. Please use it soon. If you do not use it soon, put it in an airtight receptacle and
preserve it in a cool and dark place.
Installing the ink ribbon cassette
5