Filter
Top Products
15
PROGRAMMING
Your machine allows you to program in two modes: PGM1 and PGM2. The PGM1 mode is for programming
those items that need to be changed often: unit prices of departments/PLUs, and percentages. The PGM2
mode is used for programming all PGM1-mode programs and those items that require less frequent changes:
date, time, tax rate, and the functions of each key. We describe below the programming or setting procedures of
various items.
Program every item necessary for your store following the appropriate procedures.
* To set the mode switch to the PGM1 position, use the manager or submanager key; and to set to the PGM2
position, use the manager key.
Preparations for Programming
1.
Plug your machine into a standard wall outlet.
2.
Put the manager or submanager key in the mode switch and turn it to the PGM1 or PGM2 position
depending upon the programming you are about to do.
3.
Check to see whether both journal and receipt rolls are present in the machine. If they are missing, install
journal and receipt paper rolls correctly referring to the procedure in “4. Installing and removing the paper
roll” under “OPERATOR MAINTENANCE”.
4.
Program necessary items into your machine.
Direct Programming
Date
Enter the day (one or two digits), month (two digits), and year (two digits) in this sequence.
Aug. 26, 1998
260898
=
PrintKey operation
Example
=
Date (five or six digits)
XXXXXX
Procedure
PGM 2
Setting the date and time
1
Date