Filter
Top Products
Basic Operation
-37
Turning the Power off
1
Press
STANDBY
on the projector
or
on the remote control,
then press that button again
while the confirmation message
is displayed, to put the projec-
tor into the standby mode.
Note
•If you accidentally pressed
STANDBY
or and do not want
to put the projector into the standby
mode, wait until the confirmation
message disappears.
•The projector cannot be operated
while a message “Shutting Down.
Please Wait.” is displayed.
2
Unplug the power cord from the
AC outlet after the cooling fan
stops.
Info
•Do not unplug the power cord dur-
ing projection or cooling fan opera-
tion. This can cause damage due to
the rise in internal temperature, as
the cooling fan also stops.
MUTE button
STANDBY button
ENTER button
MENU
button
', ", \, |
buttons
XG-C60X_E_PDF_p33_41.p65 03.8.28, 2:08 PM37