Filter
Top Products
21
EnglishDeutschFrançaisItalianoEspañolEnglish
Adjusting the screen display (With analog connection)
MODE SELECT-2 Menu
INPUT-1 ANALOG
1600 x 1200 V:60Hz H:75kHz
MODE SELECT-2
OSD
LANGUAGE
SCALING 0
400 LINES 640 720
Notes:
- Depending on the resolution of the input signal,
even if menu options can be selected, the display
may not change.
- To choose a menu option: button
- When adjustment complete: MENU button
OSD
After selecting [OSD], press the
button.
(When adjustment complete: MENU button)
OSD H-POSITION (OSD horizontal position)
The position of the OSD display can be moved
to the left and right. (
buttons)
OSD V-POSITION (OSD vertical position)
The position of the OSD display can be moved
up and down. (
buttons)
OSD PIVOT
The orientation of the OSD display can be
changed.( buttons)
ON: Orientation for long height display
OFF: Orientation for long width display
LANGUAGE
You can choose the language used in OSD Menu.
1.After selecting [LANGUAGE], press the
button.
2.Select the desired language using the button.
3.Press the MENU button.
SCALING (Level of scaling)
Adjusts the image to optimum sharpness when
Screen expansion is taken. (
buttons)
400 LINES (degree of resolution)
You can specify the horizontal resolution of a 400-
line screen when using US text, etc. (
buttons)
640: 640 X 400 dot mode
720: 720 X 400 dot mode (US text etc.)
Note:
- As the resolution input for other than 400 lines is
done automatically, there is no need to set it.