Sharp MX-4100N All in One Printer User Manual


 
7-38
SYSTEM SETTINGS
Contents
*1 When the Internet fax expansion kit is installed.
*2 When the facsimile expansion kit is installed.
*3 When network connection is enabled.
Speaker Volume Setting
7-82• Receive Signal Middle
• Communication Error Signal Middle
Original Print on Transaction Report Print Out Error Report Only 7-82
Transaction Report Print Select Setting
7-82
• Single Sending Print Out Error Report Only
• Broadcasting Print Out All Report
• Receiving No Printed Report
Activity Report Print Select Setting
7-83• Auto Print at Memory Full Disabled
• Print Daily at Designated Time Disabled
Body Text Print Select Setting Disabled 7-83
Pre-Setting Mail Signature Disabled 7-83
X I-Fax Send Settings 7-83
I-Fax Reception Report On/Off Setting Disabled 7-83
I-Fax Reception Report Request Timeout Setting 1 hour 7-83
Number of Resend Times at Reception Error 2 7-83
Maximum Size of E-mail Attachments Unlimited 7-83
Rotation Sending Setting All Enabled 7-84
Printing Page Number at Receiver Enabled 7-84
Recall in Case of Line Busy Times: 2, Interval 3 min. 7-84
Recall in Case of Communication Error Times: 2, Interval 3 min. 7-84
X I-Fax Receive Settings 7-84
Auto Receive Reduce Setting Enabled 7-84
Duplex Reception Setting Disabled 7-84
Set Address for Data Forwarding
7-84
• Direct SMTP Disabled
• Add Hostname or IP Address Too Disabled
• Hostname or IP Address
Letter Size RX Reduce Print Disabled 7-85
Receiving Date & Time Print Disabled 7-85
POP3 Communication Timeout Setting 60 sec. 7-85
Reception Check Interval Setting 5 min. 7-85
I-Fax Output Setting Varies depending on the machine
configuration
7-85
X Allow/Reject Mail or Domain Name Setting All Invalid 7-85
Item Factory default setting Page