Filter
Top Products
E-12
Setup & Connections
Connecting the Projector
Connecting other compatible computers
When connecting the projector to a compatible computer other than an IBM-PC (VGA/SVGA/XGA/SXGA/UXGA)
or Macintosh (i.e. Workstation), a separate cable may be needed. Please contact your dealer for more information.
When connecting this projector to a computer, select “Computer/RGB” for “Signal Type” on the GUI menu. (See page 27.)
• Connecting computers other than the recommended types may result in damage to the projector, the computer, or both.
• AUDIO INPUT for INPUT 1, 2 can be used input audio corresponding to the INPUT 1 and 2 video.
“Plug and Play” function
• This projector is compatible with VESA-standard DDC 1/DDC 2B. The projector and a VESA DDC compatible
computer will communicate their setting requirements, allowing for quick and easy setup.
• Before using the “Plug and Play” function, be sure to turn on the projector first and the connected computer last.
• The DDC, Plug and Play function of this projector operates only when used in conjunction with a VESA DDC compatible
computer.
1 Connect the yellow RCA connectors to the corresponding
yellow VIDEO INPUT 3 terminal on the projector and the Video
output terminal on the video source.
2 To use the built-in audio system, connect the red and white
RCA connectors to the corresponding red and white AUDIO
INPUT 3 terminals on the projector and the Audio output
terminals on the video source.
The S-VIDEO INPUT terminal uses a video signal system in which
the picture is separated into a color and a luminance signal to
realize a higher-quality image.
When cables are connected to both the S-VIDEO INPUT and
VIDEO INPUT 3 terminals, images input through the S-VIDEO
INPUT terminal have priority over images input through the VIDEO
INPUT 3 terminal.
• For higher quality video, you may use the S-VIDEO INPUT
terminal on the projector. S-video cable is sold separately.
• If your video equipment does not have an S-video output
terminal, use the Composite video output terminal.
Connecting the Projector to Video Equipment
You can connect your projector to a VCR, laser disc player, DVD player, DTV decoder and other audiovisual
equipment.
CAUTION
• Always turn off the projector while connecting to video equipment, in order to protect both the projector and the equipment
being connected.
To a video source (VCR, laser disc player, DTV decoder or DVD player) using the standard video input
VCR
or
Laser disc player
1 Video cable (sold separately)
2 Audio cable (sold separately)
S-video cable (sold separately)
To audio output terminals
To video output terminal
To S-video output terminal
PG-C30XU/CD (E)-b 00.5.19, 3:45 PM12