Sharp PG-C30XU Projector User Manual


 
E-28
Operation
Audio Adjustments
Picture Adjustments
I/P Conversion
This function allows you to select either an interlaced
display or a progressive display of a video signal. The
progressive display projects a smoother video image.
(Slide the MOUSE/ADJUSTMENT switch
on the remote control to the ADJ. position.)
1 Press MENU.
2 Press ß/© to select Picture.
3 Press /ƒ to select I/P Conversion, and then
press ©.
4 Press /ƒ to select Interlaced or Progressive.
5 Press ENTER to save the setting.
6 To exit from the GUI, press MENU.
Interlaced mode
Interlaced mode creates a single image through the activation
of scanning lines in two fields. Use this mode when projecting
moving images.
Progressive mode
Progressive mode creates a single image using all available
scanning lines. Use this mode when projecting still images to
avoid flicker and stripes that result from interlaced source still
images.
5
2, 3, 4
1, 6
Projector Remote control
MOUSE
ADJ.
This projectors audio is factory preset to standard
settings. However, you can adjust it to suit your own
preferences by adjusting the following audio settings.
(Slide the MOUSE/ADJUSTMENT switch
on the remote control to the ADJ. position.)
1 Press MENU. Menu bar and Picture menu
screen appear. GUI operation guide is also
displayed.
2 Press ß/© to select Audio.
3 Press /ƒ to select a specific adjustment item.
4 Press ß/© to move the mark of the selected
adjustment item to the desired setting.
5 To exit from the GUI, press MENU.
To reset all adjustment items, select Reset on the Audio
menu screen and press ENTER.
Description of Adjustment Items
2, 3, 4
1, 5
Projector
2
3
(GUI) On-screen Display
MOUSE
ADJ.
Remote control
For weaker treble
For weaker bass
Treble
Bass
Reset
For stronger treble
For stronger bass
All audio adjustment items are returned to the factory preset
settings.
© buttonß buttonSelected item
(GUI) On-screen Display
PG-C30XU/CD (E)-d 00.5.19, 3:47 PM28