Sharp PG-C30XU Projector User Manual


 
E-13
Setup & Connections
Connecting the Projector
To a DTV decoder or DVD player
1 Connect one end of the HD-15-RGB cable to the INPUT 1 or
2 port on the projector.
2 Connect the other end to the corresponding terminals on the
video source.
3 To use the built-in audio system, connect one end of the audio
cable (sold separately) to AUDIO INPUT terminal for INPUT
1, 2 on the projector.
Connect the other end to the Audio output terminal on the
video source.
Select Computer/RGB or Component for Signal Type on
the GUI menu, depending on the video source.
HD-15-RGB cable (sold separately)
To audio output terminals
DTV decoder
or
DVD player
2 To video input terminals
Audio cable (sold separately)
Connecting an amplifier and other audio components
Amplifier
Audio cable (sold separately)
To audio input terminals
CAUTION
Always turn off the projector while connecting to audio
components, in order to protect both the projector and the
components being connected.
By using external audio components, the volume can be
amplified for better sound.
The AUDIO OUTPUT terminal allows you to output audio to audio
components from the selected AUDIO INPUT terminal for INPUT
1, 2 or AUDIO INPUT 3 terminals connected to audiovisual
equipment.
PG-C30XU/CD (E)-b 00.5.19, 3:45 PM13