Filter
Top Products
30
Operation
Selecting the On-screen Display Language
Projector
(GUI) On-screen Display
English is the preset language for the On-screen
Display. The language can be set to English, German,
Spanish, Dutch, French, Italian, Swedish, Portuguese,
Chinese, Korean or Japanese.
1 Press MENU.
2 Press ∂/ƒ to select “Language”, and then press
ENTER.
3 Press ∂/ƒ to select the desired language.
4 Press ENTER to save the setting. The On-screen
Display is now programed to display in the
language selected.
5 To exit from the GUI, press MENU.
Selecting the Video Input System Mode (INPUT 2 or 3 only)
Projector
The video input system mode is preset to “Auto”;
however, it can be changed to a specific system mode,
if the selected system mode is not compatible with the
connected audiovisual equipment.
1 Press MENU.
2 Press ∂/ƒ to select “Options”, and then press
ENTER.
3 Press ∂/ƒ to select “Video Systems”, and then
press ENTER.
4 Press ∂/ƒ to select the desired video system
mode.
5 Press ENTER to save the setting.
6 To exit from the GUI, press MENU.
• When the system mode is set to “Auto”, you may not receive
a clear picture due to signal differences. Should this occur,
switch to the video system of the source signal.
(GUI) On-screen Display
2, 32, 41, 5
Remote control
2,3,42,3,51,6
Remote control
English
Picture
Options
Fine Sync
Language
PRJ Mode
END SELECT BACK ENTER
Español
Deutsch
Nederlands
Français
Italiano
Svenska
Português
Picture
Options
Language
PRJ Mode
END SELECT BACK ENTER
Lamp Timer
Keystone
AV Mute Disp.
OSD Display
Auto Power Off
Background
Video System
Blue
Auto
ON
ON
ON
Auto Source ON
100
0