Filter
Top Products
54
Appendix
Specifications
Product type
Model
Video system
Display method
DMD panel
Lens
Projection lamp
Contrast ratio
Video input signal
S-video input signal
Component input signal
Horizontal resolution
Computer RGB input signal
Pixel clock
Vertical frequency
Horizontal frequency
Audio input signal
Audio output
Speaker system
Rated voltage
Input current
Rated frequency
Power consumption
Power dissipation
Operating temperature
Storage temperature
Cabinet
I/R carrier frequency
Dimensions (approx.)
Weight (approx.)
Supplied accessories
Replacement parts
Digital Multimedia Projector
PG-M15X/PG-M15S
NTSC/NTSC 4.43/PAL/PAL-M/PAL-N/PAL 60/SECAM/DTV480i
Single Chip Digital Micromirror Device™ (DMD™) by Texas Instruments
Panel size: 0.7Љ (17.8 mm), 1 chip XGA DMD/SVGA DMD
No. of dots: 786,432 dots (1,024 [H] ן 768 [V])/PG-M15X
480,000 dots (800 [H] ן 600 [V])/PG-M15S
1-1.2 X zoom lens, F2.2–2.4, f ס 28.5–34.2 mm
High Intensity Discharge Lamp (HID Lamp), AC 120 W
500:1
RCA Connector (INPUT 3): VIDEO, composite video, 1.0 Vp-p, sync negative, 75 Ω
terminated
4-pin Mini DIN connector (INPUT 2)
Y (luminance signal): 1.0 Vp-p, sync negative, 75 Ω terminated
C (chrominance signal): Burst 0.286 Vp-p, 75 Ω terminated
29-pin Connector (INPUT 1)
Y: 1.0 Vp-p, sync negative, 75 Ω terminated
P
B: 0.7 Vp-p, 75 Ω terminated
P
R: 0.7 Vp-p, 75 Ω terminated
700 TV lines (video input)
29-pin
CONNECTOR (INPUT 1)
RGB separate/sync on green type analog input: 0–0.7 Vp-p, positive, 75 Ω terminated
H
ORIZONTAL SYNC. SIGNAL: TTL level (positive/negative)
V
ERTICAL SYNC. SIGNAL: Same as above
25–135 MHz
56–85 Hz
31.5–80 kHz
3.5 ø M
INIJACK: AUDIO, 0.4 Vrms, more than 47 kΩ (stereo)
2.0 W (monaural)
4 ן 2.8 cm
AC 100–240 V
2.0 A
50/60 Hz
180 W
<680 BTU/hour
41°F to 95°F (ם5°C to ם35°C)
14°F to 140°F (מ10°C to ם60°C)
Magnesium alloy (Terminal panel, Lamp cover and Side vent cover constructed of plastic)
38 kHz
8
55
⁄64Љ ן 1
31
⁄32Љ ן 6
59
⁄64Љ (225 (W) ן 50 (H) ן 176 (D) mm) (main body only)
8
55
⁄64Љ ן 2
19
⁄32Љ ן 6
31
⁄32Љ (225 (W) ן 66 (H) ן 177 (D) mm) (including adjustment feet
and projecting parts)
3.5 lbs (1.6 kg)
Remote control, Two AAA size batteries, Power cord for U.S., Canada etc. (5Ј 11Љ, 1.8 m),
Power cord for Europe, except U.K. (5Ј 11Љ, 1.8 m), Power cord for U.K., Hong Kong and
Singapore (5Ј 11Љ, 1.8 m), Power cord for Australia, New Zealand and Oceania (5Ј 11Љ, 1.8
m), DVI-Analog to VGA cable (5Ј 11Љ, 1.8 m), DVI-Analog to VGA adaptor, PC audio cable
(6Ј 7Љ, 2.0 m), DIN-D-sub RS-232C cable (6
1
/2Љ, 16.5 cm), Computer RGB cable (5Ј 11Љ,
1.8 cm), USB mouse control cable (5Ј 11Љ, 1.8 m), Video cable (5Ј 11Љ, 1.8 m), S-video
cable (5Ј 11Љ, 1.8 m), AV audio cable (5Ј 11Љ, 1.8 m), Soft carrying pouch, Lenscap with
strap, CD-ROM, Projector operation manual, Projector quick reference guide
Remote control (9HJ7583104001), AAA size battery (9HJ4683101001), Power cord for
U.S., Canada etc. (9HJ4283114001), Power cord for Europe, except U.K.
(9HJ4283116001), Power cord for U.K., Hong Kong and Singapore (9HJ4283117001),
Power cord for Australia, New Zealand and Oceania (9HJ4283118001), DVI-Analog to
VGA cable (9HJ4283119001), DVI-Analog to VGA adaptor (9HJ4283124001), PC audio
cable (9HJ4283120001), DIN-D-sub RS-232C cable (9HJ4283123001), Computer RGB
cable (9HJ4283111001), USB mouse control cable (9HJ4283122001), Video cable
(9HJ4283112001), S-video cable (9HJ4283113001), AV audio cable (9HJ4283121001),
Soft carrying pouch (9HJ5383101001), Lens cap with strap (9HJ7083117001), CD-ROM
(9HJ3683104001), Projector operation manual (9HJ3683107001), Projector quick
reference guide (9HJ3683110001)
This unit has some inactive pixels within acceptable tolerances which
may result in inactive dots on the picture screen. This will not affect
the picture quality or the life expectancy of the unit.
This SHARP projector uses a DMD panel. This very sophisticated
panel contains 786,432 (PG-M15X)/480,000 (PG-M15S) pixels. As
with any high technology electronic equipment such as large screen
TVs, video systems and video cameras, there are certain acceptable
tolerances that the equipment must conform to.
Specifications are subject to change without notice.